Diseño y construcción de una matriz para la deformación plástica severa de metales por la técnica de Presión Calibrada restringida (CGP)
Palabras clave:
Deformación, Materiales, Ingeneria, PlasticosSinopsis
Este texto es una publicación académica que describe el diseño y construcción de una matriz para la deformación plástica severa de metales utilizando la técnica de Presión Calibrada restringida (CGP). La investigación, realizada por Oscar Fabián Higuera Cobos, Cristian Antonio Pedraza Yepes y Alfonso Rodríguez Peña, se centra en la nanotecnología y los materiales nanoestructurados, buscando mejorar las propiedades mecánicas de los metales a través del refinamiento del tamaño de grano. El documento analiza en profundidad la técnica CGP, incluyendo su comportamiento de fuerza y la simulación de procesos mediante el software ANSYS®, para optimizar la geometría de la matriz y el coeficiente de fricción. Finalmente, detalla la fabricación del prototipo y los resultados de su puesta a punto experimental, identificando las correcciones de diseño necesarias para su funcionalidad.
Descargas
Los datos de descargas todavía no están disponibles.
Referencias bibliográficas
M. A. Meyers, A. Mishra, and D. J. Benson, “Mechanical properties of nanocrystalline materials,” Progress in Materials Science, vol. 51, no. 4, pp. 427–556, 2006, doi: 10.1016/j.pmatsci.2005.08.003.
H. Gleiter, “Nanocrystalline materials,” Progress in Materials Science, vol. 33, no. 4, pp. 223–315, 1989, doi: 10.1016/0079-6425(89)90001-7.
R. Feynman, “There’s plenty of room at the bottom,” presented at the American Physical Society, 1959.
N. Taniguchi, “On the basic concept of ‘Nano-Technology,’” in Proceedings of the International Conference on Production Engineering, 1974.
K. E. Drexler, Engines of Creation: The Coming Era of Nanotechnology. Anchor Books, 1986.
G. Binnig and H. Rohrer, “Scanning tunneling microscopy,” Surface Science, vol. 126, no. 1–3, pp. 236–244, 1983, doi: 10.1016/00396028(83)90716-1.
L. Zaidouny, T. Bohlein, J. Roth, and C. Bechinger, “Periodic average structures in colloidal quasicrystals,” Soft Matter, issue 10, pp. 8705–8710, 2014, doi: 10.1039/C4SM01607F.
M. Nasrollahzadeh, Z. Issaabadi, M. Sajjadi, S. M. Sajadi, and M. Atarod, “Chapter 2: Types of nanostructures,” in Interface Science and Technology, vol. 28, pp. 29–80, 2019, doi: 10.1016/B978-0-12-813586-0.00002-X.
S. Lijima, “Helical microtubules of graphitic carbon,” Nature, vol. 354, no. 6348, pp. 56–58, 1991.
U. Erb, “Electrodeposited nanocrystals: Synthesis, properties and industrial applications,” Nanostructured Materials, vol. 6, no. 5–8, pp. 533– 538, 1995, doi: 10.1016/0965-9773(95)00114-X
K. Lu, W. D. Wei, and J. T. Wang, “Grain growth kinetics and interfacial energies in nanocrystalline Ni‐P alloys,” Journal of Applied Physics, vol. 69, p. 522, 1991.
H. J. Fecht, E. Hellstern, Z. Fu, and W. L. Johnson, “Nanocrystalline metals prepared by high-energy ball milling,” Metallurgical Transactions A, vol. 21, p. 2333, 1990.
W. E. Sylwestrowicz and O. Hall, “The deformation and ageing of mild steel. 3. Discussion of results,” Proceedings of the Physical Society. Section B, vol. 64, no. 381, pp. 747–753, 1951, doi: 10.1088/0370-1301/64/9/303.
M. J. Zehetbauer and R. Z. Valiev, Nanomaterials by Severe Plastic Deformation: Proceedings of the Conference Nanomaterials by Severe
Plastic Deformation-NANOSPD2, Dec. 9–13, Vienna, Austria. Wiley-VCH, 2004.
A. K. Gupta, T. S. Maddukuri, and S. K. Singh, “Constrained groove pressing for sheet metal processing,” Progress in Materials Science, vol. 84, pp. 403–462, 2016, doi: 10.1016/j.pmatsci.2016.09.008.
K. Edalati, A. Q. Ahmed, S. Akrami, K. Ameyama, V. Aptukov, R. N. Asfandiyarov, M. Ashida, V. Astanin, A. Bachmaier, V. Beloshenko, et al.,
“Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review,” Journal of Alloys and Compounds, 2024, doi: 10.1016/j.jallcom.2024.174667.
I. Sabirov, M. Y. Murashkin, and R. Z. Valiev, “Nanostructured aluminium alloys produced by severe plastic deformation: New horizons in
development,” Materials Science and Engineering: A, vol. 560, pp. 1–24, 2013, doi: 10.1016/j.msea.2012.09.020.
R. B. Figueiredo and T. G. Langdon, “Fabricating ultrafine-grained materials through the application of severe plastic deformation: A review of developments in Brazil,” Journal of Materials Research and Technology, vol. 1, no. 1, pp. 55–62, 2012, doi: 10.1016/S2238-7854(12)70010-8.
R. Z. Valiev, R. K. Islamgaliev, and I. V. Alexandrov, “Bulk nanostructured materials from severe plastic deformation,” Progress in Materials Science, vol. 45, no. 2, pp. 103–189, Mar. 2000, doi: 10.1016/S0079-6425(99)00007-9.
R. Z. Valiev, Y. Estrin, Z. Horita, T. G. Langdon, M. J. Zehetbauer, and Y. Zhu, “Producing bulk ultrafine-grained materials by severe plastic deformation,” JOM, vol. 68, no. 4, pp. 1216–1226, 2016, doi: 10.1007/s11837-016-1820-6.
V. M. Segal, “Severe plastic deformation: Simple shear versus pure shear,” Materials Science and Engineering: A, vol. 338, no. 1–2, pp. 331–344, 2002, doi: 10.1016/S0921-5093(02)00066-7.
R. Z. Valiev and T. G. Langdon, “Principles of equal-channel angular pressing as a processing tool for grain refinement,” Progress in Materials Science, vol. 51, no. 7, pp. 881–981, 2006, doi: 10.1016/j.pmatsci.2006.02.003.
K. Nakamura, K. Neishi, K. Kaneko, M. Nakagaki, and Z. Horita, “Development of severe torsion straining process for rapid continuous
grain refinement,” Materials Transactions, vol. 45, no. 12, pp. 3338–3342, 2004, doi: 10.2320/matertrans.45.3338.
M. Eto, T. Sasaki, S. Fukushima, T. Shibahara, K. Miyata, and M. Wakita, “Development of super short interval multi-pass rolling technology for ultra fine-grained hot strip,” Metallurgical Research & Technology, vol. 103, no. 7–8, pp. 319–325, 2006, doi: 10.1051/metal:2006132.
S. Mizunuma, “Large straining behavior and microstructure refinement of several metals by torsion extrusion process,” Materials Science Forum, vol. 503–504, pp. 185–192, 2005, doi: 10.4028/www.scientific.net/MSF.503-504.185.
[26] T. Lowe and R. Valiev, Investigations and Applications of Severe Plastic Deformation, Materials Science Engineering, 2000, doi: 10.1007/978-94-011-4062-1.
A. Korbel, M. Richert, and J. Richert, “The effects of very high cumulative deformation on structure and mechanical properties of Al,” in II Riso International Symposium on Metallurgy and Material Science, 1981, pp. 445–450.
J. Y. Huang, Y. T. Zhu, H. Jiang, and T. C. Lowe, “Microstructures and dislocation configurations in nanostructured Cu processed by repetitive corrugation and straightening,” Acta Materialia, vol. 49, no. 9, pp. 1497– 1505, 2001, doi: 10.1016/S1359-6454(01)00069-6.
J. W. Lee and J. J. Park, “Numerical and experimental investigations of constrained groove pressing and rolling for grain refinement,” Journal of Materials Processing Technology, vol. 130–131, pp. 208–213, 2002, doi:10.1016/S0924-0136(02)00722-7.
A. Azushima, R. Kopp, A. Korhonen, D. Y. Yang, F. Micari, G. D. Lahoti, P. Groche, J. Yanagimoto, N. Tsuji, A. Rosochowski, and A. Yanagida,
“Severe plastic deformation (SPD) processes for metals,” CIRP Annals - Manufacturing Technology, vol. 57, no. 2, pp. 716–735, 2008, doi: 10.1016/j.cirp.2008.09.005.
V. M. Segal, “Materials processing by simple shear,” Materials Science and Engineering: A, vol. 197, no. 2, pp. 157–164, 1995, doi: 10.1016/0921-5093(95)09705-8.
R. Z. Valiev, “Structure and mechanical properties of ultrafine-grained metals,” Materials Science and Engineering: A, vol. 234–236, pp. 59–66, 1997, doi: 10.1016/S0921-5093(97)00183-4.
R. Z. Valiev, N. A. Krasilnikov, and N. K. Tsenev, “Plastic deformation of alloys with submicron-grained structure,” Materials Science and Engineering: A, vol. 137, no. C, pp. 35–40, 1991, doi: 10.1016/0921-5093(91)90316-F.
Y. Weng, Ultrafine Grained Steels, Springer Berlin, Heidelberg, 2009, doi: 10.1007/978-3-540-77230-9.
G. N. M. Rao and V. R. M. Kumar, “A review on recent advances in accumulative roll bonding of similar, dissimilar and metal matrix
composites,” Materials Today Proceedings, vol. 56, no. 3, pp. A13–A18, 2022, doi: 10.1016/j.matpr.2021.11.608.
D. H. Shin, J. J. Park, Y. S. Kim, and K. T. Park, “Constrained groove pressing and its application to grain refinement of aluminum,” Materials Science and Engineering: A, vol. 328, no. 1, pp. 98–103, 2002, doi: 10.1016/S0921- 5093(01)01665-3.
F. Khodabakhshi, M. Abbaszadeh, S. R. Mohebpour, and H. Eskandari, “3D finite element analysis and experimental validation of constrained groove pressing–cross route as an SPD process for sheet form metals,” International Journal of Advanced Manufacturing Technology, pp. 1–15, 2014.
G. G. Niranjan and U. Chakkingal, “Deep drawability of commercial purity aluminum sheets processed by groove pressing,” Journal of Materials Processing Technology, vol. 210, no. 11, pp. 1511–1516, 2010, doi: 10.1016/j.jmatprotec.2010.04.009.
M. S. Ghazani and A. Vajd, “Finite element analysis of the groove pressing of aluminum alloy,” Modeling and Numerical Simulation of Material Science, vol. 2014, no. January, pp. 32–36, 2014, doi: 10.4236/mnsms.2014.41006.
H. S. Siddesha and M. Shantharaja, “Optimization of cyclic constrained groove pressing parameters for tensile properties of Al6061/SiC metal matrix composites,” Procedia Materials Science, vol. 5, pp. 1929–1936, 2014, doi: 10.1016/j.mspro.2014.07.515.
Z. S. Wang, Y. J. Guan, and P. Liang, “Deformation efficiency, homogeneity, and electrical resistivity of pure copper processed by constrained groove pressing,” Rare Metals, vol. 33, no. 3, pp. 287–292, 2014, doi: 10.1007/s12598-013-0200-4.
E. Hosseini and M. Kazeminezhad, “Implementation of a constitutive model in finite element method for intense deformation,” Materials & Design, vol. 32, no. 2, pp. 487–494, 2011, doi: 10.1016/j.matdes.2010.08.033.
E. Hosseini, M. Kazeminezhad, A. Mani, and E. Rafizadeh, “On the evolution of flow stress during constrained groove pressing of pure copper sheet,” Computational Materials Science, vol. 45, no. 4, pp. 855–859, 2009, doi:10.1016/j.commatsci.2008.12.004.
K. Peng, L. Su, L. L. Shaw, and K. W. Qian, “Grain refinement and crack prevention in constrained groove pressing of two-phase Cu-Zn alloys,” Scripta Materialia, vol. 56, no. 11, pp. 987–990, 2007, doi: 10.1016/j.scriptamat.2007.01.043.
B. R. Sunil, A. A. Kumar, T. S. S. Kumar, and U. Chakkingal, “Role of biomineralization on the degradation of fine grained AZ31 magnesium alloy processed by groove pressing,” Materials Science and Engineering: C, vol. 33, no. 3, pp. 1607–1615, 2013, doi: 10.1016/j.msec.2012.12.095.
K. Peng, X. Mou, J. Zeng, L. L. Shaw, and K. W. Qian, “Equivalent strain, microstructure and hardness of H62 brass deformed by constrained groove pressing,” Computational Materials Science, vol. 50, no. 4, pp. 1526–1532, 2011, doi: 10.1016/j.commatsci.2010.12.010.
A. Thirugnanam, T. S. Sampath Kumar, and U. Chakkingal, “Tailoring the bioactivity of commercially pure titanium by grain refinement using groove pressing,” Materials Science and Engineering: C, vol. 30, no. 1, pp. 203–208, 2010, doi: 10.1016/j.msec.2009.10.002.
A. Vaidyanathan, A. K. Gupta, and M. A. Wahed, “Deep drawing of constrained groove pressed EDD steel sheets,” Materials Today Proceedings, vol. 5, no. 2, pp. 3713–3718, 2018, doi: 10.1016/j.matpr.2017.11.623.
K. N. Nagaraju, A. R. Sunil, K. Sachin, H. Sujay, H. S. Siddesha, and S. A. Kumar, “Influence of constrained groove pressing passes and annealing characteristics on the mechanical properties of 6061 aluminum alloy,” Materials Today Proceedings, vol. 5, no. 1, pp. 2660–2665, 2018, doi: 10.1016/j.matpr.2018.01.046.
S. C. Yoon, A. Krishnaiah, U. Chakkingal, and H. S. Kim, “Severe plastic deformation and strain localization in groove pressing,” Computational Materials Science, vol. 43, no. 4, pp. 641–645, 2008, doi: 10.1016/j.commatsci.2008.01.007.
A. Sajadi, M. Ebrahimi, and F. Djavanroodi, “Experimental and numerical investigation of Al properties fabricated by CGP process,” Materials Science and Engineering A, vol. 552, pp. 97–103, 2012, doi: 10.1016/j.msea.2012.04.121.
Z. S. Wang, Y. J. Guan, G. C. Wang, and C. K. Zhong, “Influences of die structure on constrained groove pressing of commercially pure Ni sheets,” Journal of Materials Processing Technology, vol. 215, no. 1, pp. 205–218, 2015, doi: 10.1016/j.jmatprotec.2014.08.018.
Z. S. Wang, Y. J. Guan, and C. K. Zhong, “Effects of friction on constrained groove pressing of pure Al sheets,” Advanced Materials Research, vol. 926, pp. 81–84, 2014, doi: 10.4028/www.scientific.net/AMR.926-930.81.
F. Nazari and M. Honarpisheh, “Analytical model to estimate force of constrained groove pressing process,” Journal of Manufacturing
Processes, vol. 32, pp. 11–19, 2018.
J. T. Celigüeta, “Método de los elementos finitos para análisis estructural,” Tecnun, 4th ed., ISBN: 84-921970-2-1, Unicopia C.B., España, 2011. Solidworks, “Linear elastic isotropic model,” 2010. [Online]. Available: http://help.solidworks.com/2010/english/SolidWorks/cworks/LegacyHelp/Simulation/Materials/Material_models/Linear_Elastic_Isotropic_Model.htm#:~:text=A material is said to,expansion%2C thermal conductivity%2Cetc.&text=In order to define the,the elastic mo.
ANSYS®, “Nonlinear structural,” 2005. [Online]. Available: http://www-eng.lbl.gov/~als/FEA/ANSYS_V9_INFO/Workbench_Simulation_9.0_Nonlin/ppt/AWS90_Structural_Nonlin_Ch02_Nonlinear.ppt.
T. Harris, “ANSYS Mechanical – Overcoming convergence difficulties with automatic remeshing (Nonlinear adaptive region),” 2019. [Online]. Available: http://www.padtinc.com/blog/tag/adaptive-meshing/.
Ö. Küçük, “Contact types and behaviours in ANSYS,” 2018. [Online]. Available: http://www.mechead.com/contact-types-and-behaviours-in-ansys/.
AK Steel, “ARMCO pure iron,” Product data bulletin, 2018. [Online]. Available:https://www.aksteel.nl/files/downloads/172888_armco_pure_iron_pdb_euro_final_secured_92.pdf.
K. Changela, H. Krishnaswamy, and R. K. Digavalli, “Development of combined groove pressing and rolling to produce ultra-fine grained Al alloys and comparison with cryorolling,” Materials Science and Engineering A, vol. 760, pp. 7–18, 2019, doi: 10.1016/j.msea.2019.05.088.
METALS Supermarkets, “Tool steel | The four types of steel (Part 4),” 2015. [Online]. Available: https://www.metalsupermarkets.com/toolsteel-types/.
F. Khodabakhshi, M. Abbaszadeh, H. Eskandari, and S. R. Mohebpour, “Application of CGP-cross route process for microstructure refinement and mechanical properties improvement in steel sheets,” Journal of Manufacturing Processes, vol. 15, no. 4, pp. 533–541, 2013, doi: 10.1016/j.jmapro.2013.08.001.
H. R. Rezaei, S. Aradpur, and M. Rafiei, “The effect of groove angles on groove pressing process,” in Proceedings of the International Conference on Mechanical Engineering and Advanced Technology, 2012.
M. Borhani and F. Djavanroodi, “Rubber pad-constrained groove pressing process: Experimental and finite element investigation,” Materials Science and Engineering A, vol. 546, pp. 1–7, 2012.
S. Kumar, K. Hariharan, R. Kumar, and S. Kumar, “Accounting Bauschinger effect in the numerical simulation of constrained groove pressing process,” Journal of Manufacturing Processes, vol. 38, no. November 2018, pp. 49–
62, 2019, doi: 10.1016/j.jmapro.2018.12.013.
J. A. Muñoz, O. F. Higuera, and J. M. Cabrera, “Microstructural and mechanical study in the plastic zone of ARMCO iron processed by ECAP,” Materials Science and Engineering A, vol. 697, no. May, pp. 24–36, 2017, doi: 10.1016/j.msea.2017.04.108.
S. A. Nolasco and D. J. Morrón, “Repotenciación de una prensa de 60 toneladas implementando un sistema electrohidráulico para fines
investigativos en la Universidad del Atlántico,” Universidad del Atlántico, 2018.
J. S. Arcila and F. D. Cruz, “Diseño y construcción de los troqueles propios del método de presión acanalada restringida y simulación de este método en placas de hierro ARMCO,” Universidad Tecnológica de Pereira, 2017.
E. Hosseini and M. Kazeminezhad, “Integration of physically based models into FE analysis: Homogeneity of copper sheets under large
plastic deformations,” Computational Materials Science, vol. 48, no. 1, pp. 166–173, 2010.
